MP10

MP10 touch trigger inspection probe system with optical transmission for machining centres. Uses M code switch on / switch off method. Now superseded by OMP60.

About MP10

The MP10 is a machining centre inspection probe using infra-red optical transmission. The probe is turned on using either an M code or an auto-start feature and turned off using an M code or an internal timer.

The new generation OMP60 probe system supersedes the MP10 and offers improved transmission integrity and other benefits.

About MP10R

The MP10R is visible-red optical transmission probe designed for twin spindle machining centres, where it is used in combination with an infra-red optical transmission probes.

The MP10R has been superseded by the twin probe system, which allows two infra-red transmission probes to operate on the same machine without cross-talk.

About MP10E

The MP10E probe is now obsolete, however, relevant literature can be downloaded from the right of this page. Renishaw recommends upgrading to the new generation OMP60 probe.

MP10 features and benefits

• Secure, reliable transmission
• Sealed to IP68
• Stylus length up to 100mm
• Selectable transmission range settings
• Optical output at 35° and 70° to the probe axis to suit different installations

See the MP10 data sheet for product specifications

MP10 specification

Specification
Sense directions	±X, ±Y, +Z
Weight	730 g (26 oz)
Transmission type	360° infra-red optical transmission
Transmission range	OMI: 3 m (9.84 ft) OMM: 6 m (19.7 ft)
Uni-directional repeatability (max 2 sigma at stylus tip)	1.0 µm (0.00004 in)
Trigger force XY plane - lowest force XY plane - highest force +Z direction	0.75 N (2.64 ozf) 1.40 N (4.92 ozf) 4.20 N (14.8 ozf)
Stylus overtravel XY plane +Z direction	±17.5° 8 mm (0.31 in)
Standard stylus length	50 mm (1.97 in)
Maximum stylus length	150 mm (5.90 in)
Battery type	1 x 6LR61 (PP3 9 V alkaline)
Battery life - stand-by - 5% usage - continuous life	365 days 98 days 140 hours
Sealing	IP X8
Shanks	Various
Compatible interface	OMI or OMM / MI 12

MP10 accessories and ordering information

Probe

Part number	Description
A-2033-1099	MP10 probe - 35° optical output
A-2033-1100	MP10 probe - 70° optical output
A-2033-0576	OMM optical receiver
A-2033-0830	OMM mounting bracket
A-2075-0142	MI 12 interface

Accessories

Part number	Description
A-2030­-0244	Accessories kit
P-BT03-0001	9 V alkaline battery
A-2051-7105	Outer diaphragm kit
A-2053-7531	TK1 tool kit

Adaptors and extensions

Part number	Description
A-2033-6571	MPE1 - 100 mm probe extension
A-2033-6595	MPE2 - 150 mm probe extension
A-2033-6657	MPE3 - 200 mm probe extension
A-2033-6657	MP10 to TP6 adaptor
A-2063-7774	MP10 to LP2 adaptor

MP10 recommended software

EasyProbe

Inspection

Inspection Plus